Amazing New Ideas

How-to-flatten-bent-sheet-metal, to flatten the entire part, if the flat-pattern1 feature is present, unsuppress flat-pattern1, or click flatten on the sheet metal toolbar.. the bend lines are shown by default when you unsuppress flat-pattern1.to hide the bend lines, expand flat-pattern1, right-click bend-lines, and select hide.. How to flatten sheet metal? 04-07-2010, 04:42 am. in this particular case, ss. i squished it in the vise, but there is still about 10-20 thou of curvature that won't come out. tags: none. winchman. senior member. join date: aug 2003; posts: 4004; share tweet #2. 04-07-2010, 04:50 ..., straightening sheetmetal - shaping up a basic guide to straightening sheetmetal. see all 31 photos. wpengine words. mar 20, 2008. there's no escaping the fact that if your project is based on an ....

Last time we had just made a flange on a simple part. this time, let’s take a look at some of the flange options. partial flange. one of the options is partial flange.the partial flange takes an edge flange dragged off of an edge, like the one on the left, and turns it into a flange that only goes part way across like the one on the right.